2 Replies Latest reply on Mar 16, 2017 7:28 AM by michael56

    Upgrade 1531p config to 1534p

    thowc New Member

      Hello everyone,


      I have what I think is a simple question. I need more ports and want to replace my 1531p with a 1534p. Can I just load the 1531 config into the 1534, configure the remaining ports, and then I'm good?


      Thanks for any info!


        • Re: Upgrade 1531p config to 1534p
          jayh Hall_of_Fame

          It should work. If there are significant firmware differences some syntax may have changed. 


          After loading the old configuration onto the 1534p you can run the show output-errors command to see if anything couldn't be parsed and if so manually edit the configuration.

          • Re: Upgrade 1531p config to 1534p
            michael56 New Member

            Yes, you can indeed upgrade to the 1534 with no trouble.

            Adtrans AOS should be able to handle it since they are of the same family of devices.


            The 1531 has 10 gig eth ports and 2 fiber ports (port 11 and 12).

            The 1534 has 24 gig eth ports and 4 fiber ports (port 25,26,27,28).


            Just do a 'range' on your interface builds (if they are built identical and range gig eth ports 1-24 for the 1534 device.


            You can drop the current config of the 1531 into the 1534, then add gig ports 10-24 and 25-28.


            Should work well for you, I deal with them daily.