Customer has a Netvanta 3448 with eight NV 150's connected to the switchports. They want to provide two SSID's, one called Corporate_wifi for Corporate users to access the corporate lan as well as the Internet, the other SSID called Guest_wifi is to provide Guests access to the Internet only. The inetrnet is available through ethernet 0/1 IP Address 10.10.10.1/24. The corporate lan is on ethernet 0/2 IP Address 172.16.0.1/16. Valn 1 is not shutdown, but has no ip address. Vlan 2 has IP Address 192.168.1.1/24. The 3448 has a DHCP Server pool for the Guest users delivering 192.168.1.0/24 with Default gateway 192.168.1.1, excluded addresses 192.168.1.1-192.168.1.10. There is a DHCP server on the corporate Lan at 172.16.1.33 to provide corporate wireless users a dhcp address. AWCP is enabled and sees the NV150's as being controlled by the 3448. On switchport 0/1 an IP address 192.168.1.2 is sent to the unit and it is up and running.
interface dot11ap 1 ap-type nv150
access-point mac-address 00:A0:C8:xx:xx:xx
encapsulation 802.1q awcp-vlan 1 native priority 7
event-history priority 6
interface dot11ap 1/1 radio-type 802.11bg
interface dot11ap 1/1.1
ssid broadcast-mode "Corporate_wifi_
security mode wpa tkip aes-ccmp psk xxxxxxxxxx
interface dot11ap 1/1.2
ssid broadcast-mode "Guest_wifi"
security mode none
Now the problem is when a PC connects wirelessly they can connect to SSID Corporate_wifi just fine and get to the Internet, but they get an address 192.168.1.x, I have not configured bridging between the switchports and the ethernet0/2 so it can't get an address 172.16.x.x yet but i didn't think it would get an address from the Guest_wifi pool 192.168.1.x. Then when we try connecting to the SSID Guest_wifi it looks like it is trying to connect, but never gets an address. We have int dot11ap 1/1.2 configured with the Vlan-id 2 command and believe it should be assigned an address from the 192.168.1.x range.
Can anyone help?